Shower room procurement skills

To choose a shower room, the choice of shower room should be adapt to the shower room, and it is necessary to consider according to the size of your bathroom space. And shower room safety is also one of the important factors for consideration.



1. The quality of the glass is very critical.


Ordinary glass cannot be used as a shower room. The tempered glass must be used and the following three aspects must be obeyed: 1. There are certification signs, it is best to print directly on the glass with laser; 2. The thickness of the tempered glass is 4mm, 6mm, 8mm, 10mm and other specifications. Generally, 6mm-8mm can be used; 3. Check whether the edge of the glass is damaged, the chamfering and grinding treatment are flat, and the probability of self -explosion after installation of problems with problems will be much higher.


2. The aluminum in the shower room must be strong


The inferior aluminum material is only 0.7mm-1.1mm thick, and mostly uses recycling waste aluminum to save costs. The surface is covered with sandylons, pinhole, and patterns. The color is darker, the texture is soft, and it is easy to deform or break. It is difficult to clean and rust at home, which can easily cause the shower room to burst.


Good aluminum materials are not only strict, but also have multiple layers of treatment on the surface. The coating is firm, the color is bright, and the thickness is not corrosive. The thickness will be between 1.2-1.5 mm, and some even reach 2 mm.


3. The sliding rail of the shower room should be smooth


The sliding rail with poor quality is difficult to pull, and the glass is easy to explode. Therefore, the wheels of the pulley should be used for pressure resistance, such as 304 stainless steel, high -end synthetic materials. The wheel seal is well -sealed, and the water vapor is not easy to enter the wheels, which can ensure the smoothness of the wheels.


4. The handle of the shower room must be safe


Don’t be too obtrusive for the shower house, especially when there are old people and children at home, the angular handle is easily injured when bathing. Therefore, choose smooth appearance and easy to switch.


5. The strips in the bathroom should be very tight


Shower room water is heavy and the temperature is high, so the tape of the polymer material is easy to aging, and it usually needs to be replaced every one or two years. The sealing bar of high -quality shower rooms should not have breakpoints at the club. The sealing bar between the glass doors should be magnetic, so the sealing performance will be better.


6. The direction of the shower room door should be comfortable


Sliding doors do not occupy space, which is more suitable for small families in the bathroom, but the sliding rail is prone to scaling or falling into hard objects, and it is difficult to clean it. Opening the door horizontally, suitable for large bathrooms. It is easy to save effort, but do all the efforts, and do not have an object that is easy to bump. You can choose different ways to open according to your family situation.


7. Choose a shower room for local conditions


The choice of shower room should be considered according to the size of your bathroom space. Therefore, the bathroom space should be reserved before the decoration. If the bathroom is 4 to 5 square meters, you can choose a shower room of 1 meter by 1 meter; if the bathroom is 8 to 10 square meters, you can choose 1.5 meters by 1.5 meters, and the height of the room should not be less than 2.2 meters.


Therefore, not only should we pay attention to the area and height of the room when buying, but also pay attention to the measurement and planning before basic decoration, and reserve drainage, water supply and wiring positions. Otherwise, it will be inconvenient to work or bring in future use.

Share this story